Bootdata ok (command line is root=/dev/nfs,rw nfsroot=192.168.0.1://NFS/ROOT-X64/ ip=:::::eth0:autoconf pci=routeirq notsc console=ttyS0,9600n8 BOOT_IMAGE=20060516_XEON-64_2.6.15.7-NBDFIX-ME1000 ) Linux version 2.6.15.7-NBDFIX (root@X64) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #6 SMP Tue May 16 18:34:35 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffe0000 (usable) BIOS-e820: 00000000dffe0000 - 00000000dffef000 (ACPI data) BIOS-e820: 00000000dffef000 - 00000000dfffdc00 (ACPI NVS) BIOS-e820: 00000000dfffdc00 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec86000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7f80 ACPI: RSDT (v001 A M I OEMRSDT 0x10000408 MSFT 0x00000097) @ 0x00000000dffe0000 ACPI: FADT (v002 A M I OEMFACP 0x10000408 MSFT 0x00000097) @ 0x00000000dffe0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000408 MSFT 0x00000097) @ 0x00000000dffe0390 ACPI: MCFG (v001 A M I OEMMCFG 0x10000408 MSFT 0x00000097) @ 0x00000000dffe04a0 ACPI: OEMB (v001 A M I AMI_OEM 0x10000408 MSFT 0x00000097) @ 0x00000000dffef040 ACPI: DSDT (v001 ALIEF ALIEF086 0x00000086 INTL 0x02002026) @ 0x0000000000000000 On node 0 totalpages: 1030493 DMA zone: 2117 pages, LIFO batch:0 DMA32 zone: 899096 pages, LIFO batch:31 Normal zone: 129280 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80400, GSI 48-71 ACPI: IOAPIC (id[0x0b] address[0xfec85000] gsi_base[72]) IOAPIC[3]: apic_id 11, version 32, address 0xfec85000, GSI 72-95 ACPI: IOAPIC (id[0x0c] address[0xfec85400] gsi_base[96]) IOAPIC[4]: apic_id 12, version 32, address 0xfec85400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) Checking aperture... Built 1 zonelists Kernel command line: root=/dev/nfs,rw nfsroot=192.168.0.1://NFS/ROOT-X64/ ip=:::::eth0:autoconf pci=routeirq notsc console=ttyS0,9600n8 BOOT_IMAGE=20060516_XEON-64_2.6.15.7-NBDFIX-ME1000 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2992.609 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Placing software IO TLB between 0x5560000 - 0x9560000 Memory: 4049372k/4718592k available (3926k kernel code, 144288k reserved, 2133k data, 224k init) Calibrating delay using timer specific routine.. 5991.82 BogoMIPS (lpj=29959138) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.469 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 5985.30 BogoMIPS (lpj=29926522) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 APIC error on CPU1: 00(40) CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 37 cycles, maxerr 1215 cycles) Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 5985.20 BogoMIPS (lpj=29926021) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 APIC error on CPU2: 00(40) CPU 2: Syncing TSC to CPU 0. CPU 2: synchronized TSC with CPU 0 (last diff -109 cycles, maxerr 915 cycles) Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 5985.23 BogoMIPS (lpj=29926173) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 3 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.00GHz stepping 01 APIC error on CPU3: 00(40) CPU 3: Syncing TSC to CPU 0. CPU 3: synchronized TSC with CPU 0 (last diff 72 cycles, maxerr 1215 cycles) Brought up 4 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:01:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPA0.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC1.DBSA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EPC1.DBSB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *7) ACPI: PCI Interrupt Link [LNKB] (IRQs *7) ACPI: PCI Interrupt Link [LNKC] (IRQs *7) ACPI: PCI Interrupt Link [LNKD] (IRQs *7) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20 GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 52 (level, low) -> IRQ 21 GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:08:04.1[B] -> GSI 53 (level, low) -> IRQ 22 GSI 23 sharing vector 0xE1 and IRQ 23 ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 100 (level, low) -> IRQ 23 ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 17 (level, low) -> IRQ 20 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) pnp: 00:09: ioport range 0x680-0x69f has been reserved pnp: 00:09: ioport range 0x640-0x65f has been reserved pnp: 00:09: ioport range 0x600-0x60f has been reserved pnp: 00:09: ioport range 0x6c0-0x6df has been reserved pnp: 00:09: ioport range 0x700-0x71f has been reserved pnp: 00:09: ioport range 0x720-0x73f has been reserved pnp: 00:09: ioport range 0x740-0x74f has been reserved PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:07:00.2 IO window: c000-cfff MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: c000-cfff MEM window: fe900000-feafffff PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.2 IO window: b000-bfff MEM window: fe300000-fe7fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: b000-bfff MEM window: fe300000-fe8fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: a000-afff MEM window: fc200000-fe2fffff PREFETCH window: e2000000-e20fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:07:00.0 to 64 PCI: Setting latency timer of device 0000:07:00.2 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 audit: initializing netlink socket (disabled) audit(1148806302.560:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Coda Kernel/Venus communications, v5.3.20, coda@cs.cmu.edu Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.25 [Flags: R/W]. SGI XFS with ACLs, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[pcie00] Allocate Port Service[pcie01] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 Allocate Port Service[pcie00] Allocate Port Service[pcie01] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[pcie00] Allocate Port Service[pcie01] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:07.0 to 64 Allocate Port Service[pcie00] Allocate Port Service[pcie01] kobject_register failed for radeonfb (-17) Call Trace:{kobject_register+65} {bus_add_driver+94} {driver_register+82} {__pci_register_driver+156} {radeonfb_old_init+315} {init+473} {child_rip+8} {init+0} {child_rip+0} Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones ipmi message handler version 38.0 PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 PNP: PS/2 controller doesn't have KBD irq; using default 1 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: loaded (max 8 devices) ibmasm: IBM ASM Service Processor Driver version 1.0 loaded Ethernet Channel Bonding Driver: v2.6.5 (November 4, 2005) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 100 (level, low) -> IRQ 23 e100: eth0: e100_probe: addr 0xfe7ff000, irq 23, MAC addr 00:90:27:A2:7B:8B tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... hda: Maxtor 6B200P0, ATA DISK drive hdb: Maxtor 6B200P0, ATA DISK drive isa bounce pool size: 16 pages ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 1024KiB hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(33) hda: cache flushes supported hda: hda1 hdb: max request size: 1024KiB hdb: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(33) hdb: cache flushes supported hdb: hdb1 hdb2 3ware 9000 Storage Controller device driver for Linux v2.26.02.004. libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 18 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 18 ata1: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:407f ata1: dev 0 ATA-6, max UDMA/133, 390721968 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ATA: abnormal status 0x7F on port 0xE407 scsi1 : ata_piix Vendor: <7>Losing some ticks... checking if CPU frequency changed. ATA Model: WDC WD2000JD-19H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sda: drive cache: write back SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 aoe: aoe_init: AoE v2.6-14 initialised. usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice I2O subsystem v1.288 i2o: max drivers = 8 I2O ProcFS OSM v1.145 i2c /dev entries driver i2c-sis96x version 1.0.0 pc87360: PC8736x not detected, module not inserted. md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 4608.800 MB/sec raid5: using function: generic_sse (4608.800 MB/sec) md: multipath personality registered as nr 7 md: faulty personality registered as nr 10 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com device-mapper: dm-multipath version 1.0.4 loaded device-mapper: dm-round-robin version 1.0.0 loaded device-mapper: dm-emc version 0.0.3 loaded NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team registering ipv6 mark target NET: Registered protocol family 17 ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending DHCP requests ., OK IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.50 IP-Config: Complete: device=eth0, addr=192.168.0.50, mask=255.255.255.0, gw=192.168.0.1, host=xeon, domain=, nis-domain=(none), bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=/NFS/ROOT-XEON1/ md: Autodetecting RAID arrays. md: autorun ... md: considering sda1 ... md: adding sda1 ... md: created md10 md: bind md: running: md10: bitmap initialized from disk: read 12/12 pages, set 533 bits, status: 0 created bitmap (187 pages) for device md10 raid1: raid set md10 active with 1 out of 2 mirrors md: ... autorun DONE. Looking up port of RPC 100003/2 on 192.168.0.1 Looking up port of RPC 100005/1 on 192.168.0.1 VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 224k freed Using specific hotkey driver eth0: no IPv6 routers present